Getting To Know Your Telephone - Alcatel Advanced Reflexes Quick Manual

Getting to know your telephone

Navigator
Top line
Previous
page
Bottom line
Scan several pages of display and select line
required (by default, bottom line is active).
Light indicates Audio keys
messages received.
loudspeaker or
Mute key, so that
receiver volume
your correspondent
cannot hear you.
Alphabetic keypad
The keypad is protected by a flap and can be used for the call by name,
the message service and programming. A self-adhesive «Memo» label
can be bonded inside the flap.
Display and display keys
Comprises two lines and several pages of information concerning the present call and the functions
accessible using the keys corresponding to the lines on the screen.
Next
page
Call required number.
Redial last number dialled.
Prohibit outside calls.
Make an appointment.
Pick up a call to another number.
To check or modify your key programming.
To terminate a call
or programming.
Loudspeaker:
to share a conversation
to reduce to increase
loudspeaker or
receiver volume
Hands free:
to make or answer a call
without lifting the receiver
You have an ALCATEL Advanced REFLEXES digital telephone. The large display, the
navigator and the alphabetic keypad will help you use your telephone easily and make
optimum use of the many functions offered.
Divert your calls to another number.
Display more information if required.
Customize your terminal.
Program company data.
Program and manage the installation.
Programmable keys and icons
To make a call, activate a service or manage
your calls.
Each key has a corresponding icon:
Line icons
Incoming call (flashing).
Call in progress.
Call on hold.
Call on common hold.
Function icons
Function active.
Function requiring action.
Terminal or line busy.
Some function keys are preprogrammed:
Divert your calls to another terminal.
Access the various mail services.
Access your personal directory.
Make an ISDN call.
Transfer call to another terminal.
Installing the programmable key label
A printed label is supplied with the terminal. This should be installed
beneath the programmable keys.
1 1 Insert a flat "blade" into the slot
(1 slot per key block).
2 2
Raise the cover.
3 3 Slide the printed label into
position.
Replace the cover.
4 4