Dialout For Another Terminal; Callback On Busy - Aastra OpenCom 100 series Quick Reference Manual

7.5

Dialout for Another Terminal

H*51* Z
(device ID)
You can also conduct automatic dialling for another terminal. Enter the device ID
of the terminal from which the dialling is to be conducted. Then enter the call
number to be called. The next time the subscriber whose device ID you entered
picks up the handset, (or when using a headset, presses the headset Talk key), the
saved destination call number will be dialled automatically. This programmed
number remains saved for 30 seconds. After 30 seconds, the automatic dialling will
be deactivated automatically.
7.6

Callback on Busy

If the internal or external number you have dialled is busy, you can leave a callback
request. (This is not possible if the destination number is a hunt group telephone
number.) Your telephone will ring as soon as the other party has ended his call.
When you lift the handset, the number of the other party will be dialled.
This feature cannot be used with a SIP terminal.
Leaving a callback request
G*37#
Alternatively:
G6h
On ISDN telephones you can activate "callback on busy" by means of the corre-
sponding function key or a menu.
Cancelling a callback request
G#37#
You cancel your callback request with this procedure.
* Z
(destination call number)
Special Calls
#
25