Announcement; Intercom - Aastra OpenCom 100 series Quick Reference Manual

7.3

Announcement

H*13* Z
For consultation calls:
GR*13* Z
Using this procedure you can make announcements to system telephones. The
loudspeaker of the destination telephone is activated without a ring, and your
announcement is heard by those present in the room.
If you want to start an announcement on several system terminals to a hunt group
phone number at which the call is signalled simultaneously for example, all called
subscribers hear the announcement at that same time. If one of these subscribers
responds to the announcement (by answering the call), the announcement con-
nection to the other system terminals is terminated.
7.4

Intercom

H*131* Z
For consultation calls:
GR*131* Z
After entering the device ID, you can initiate an announcement to a single system
terminal. The microphone is activated on the terminal called and the person you
are calling can immediately answer your announcement. The "intercom" function
cannot be used for announcements to a group of terminals.
24
#
(internal tel. no.)
(internal tel. no.)
Note: If a called party is a member of a user group for which
"Intercom protection" is activated, announcements will not
be made for his telephone number.
#
(device ID)
#
(device ID)
Note: If a called party is a member of a user group for which
"Intercom protection" is activated, announcements will not
be made for his telephone number.
#
Special Calls