Toggling; Disconnecting A Call; Transferring A Call And Notifying The Destination Party - Aastra OpenCom 100 series Quick Reference Manual

3.2

Toggling

GR2G
...
You can toggle (i.e. switch back and forth) between two calls.
On ISDN telephones and on SIP terminals you toggle between two connections by
means of the corresponding function key or a menu.
If you want to talk to both parties at the same time, you can set up a three-party
conference (see Starting a Three-Party Conference on page 11).
3.3

Disconnecting a Call

GR1G
...
When you have several calls, you can disconnect one (e.g. a consultation call)
without hanging up the handset.
On ISDN telephones you disconnect calls by means of the corresponding function
key or a menu. On a SIP terminal, please review the user guide of the manufacturer
on how to disconnect a call.
3.4 Transferring a Call and Notifying the
Destination Party
GR
(external access code, e.g.
You can transfer an incoming call to another internal or external number. After
notifying the other party of the transfer, hang up the handset.
If the party to whom you want to transfer the call is unavailable or busy, dis-
connect this call by pressing the
set up a new consultation, or press the
hold again.
On a SIP terminal, please review the user guide of the manufacturer on how to
transfer a call with notifying the destination party.
10
0 Z
) (destination no.)
R
key. You will again hear a dialling tone and can
R
key once more to speak to the party on
Several Parties
G h
...