Service Mode - Samsung SCX-6345N/XAA Service Manual

m m m a a a n n n u u u a a a l l l s s s ) ) ) y y y o o o u u u P P P c c c o o o m m m
Alignment & Adjustments

4.5 Service Mode

4.5.1 Introduction
This document will capture the behavior specifications for the GUI Windows for Diagnostics
Each section of this document describes one feature with a step window image and script.
However, used window image is not fixed image from the specification point of view. Acquire detail information
from script. Window image is just example image will be implemented.
This is intended to aid GUI designers, reviewers & also testers.
Associated Documents:
<The documents that are associated with this should be mentioned here. For example in case of Basic Copy, the
following could be the associated documents>
4.5.2 Entry Point
The entry for Diagnostics is the combination of hard key.
User should press xxx and yyy altogether.
After pressing the hard button for entry, OP displays Login window.
Login window has editbox for Passcode input.
Passcode has 4 digits.
Passcode is 1934
After input the passcode and OK button, OP shall wait until get the response from MCB notifying that MCB is idle.
Once Diagnostics window is displayed, all hard buttons except numeric button and clear button shall be dis-
abled.
Below is the main window of Diagnostics.
Figure 2-1 Diagnostics Main window
Service Manual
4-28
Samsung Electronics
m m m a a a n n n u u u a a a l l l s s s ) ) ) y y y o o o u u u P P P c c c o o o m m m