Samsung SCX-6345N/XAA Service Manual page 113

Digital laser mfp scx-6345 series
Table of Contents

Advertisement

Display
Non Genuine Drum,
Replace Drum
Non Genuine Drum,
Replace Drum1
Non Genuine Toner,
Replace Toner
Non Genuine Toner,
Replace Toner1
Output Bin full
Paddle Fault
Paper Sensed in DADF.
Rear Jogger Fault
Registration Jam
Replace Drum
Replace Drum1
Replace toner
Scan Feeding Jam
SMPS Fan failure
Samsung Electronics
Meaning
The drum cartridge installed is not a
genuine cartridge.
This message appears when you selected
Continue at Non Genuine Drum, Replace
Drum prompt.
The drum cartridge installed is not a
genuine cartridge.
This message appears when you selected
Stop at Non Genuine Drum, Replace
Drum1 prompt.
The toner cartridge installed is not a
genuine cartridge.
This message appears when you selected
Continue at Non Genuine Toner, Replace
Toner prompt.
The toner cartridge installed is not a
genuine cartridge.
This message appears when you selected
Stop at Non Genuine Toner, Replace
Toner1 prompt.
The printed papers are full on the output
tray.
Paddle unit is not operating.
When the machine is on, jammed paper is
detected in the DADF.
Rear Jogger is not operating.
Paper has jammed in the registration area.
The drum cartridge is at the end of its life.
When the drum replacement.
message appears on the screen and if you
select Continue, this message displays.
The drum cartridge is at the end of its life.
When the drum replacement.
message appears on the screen and if you
select Stop, this message displays.
The toner cartridge had run out at least
once before.
The lead edge of the document failed to
actuate the scan sensor within the correct
time after actuating the registration sensor.
There is a problem with the SMPS (Switch
Mode Power Supply) Fan.
Alignment & Adjustments
Suggested solutions
Install the Samsung-genuine drum
cartridge.
Install the Samsung-genuine drum
cartridge.
Install the Samsung-genuine drum
cartridge.
Install the Samsung-genuine drum
cartridge.
Remove printed outs from the output tray.
Open the finisher door and clear any
jammed paper (if there is). If this error
message shows on the screen again,
cycle power.
Open the DADF cover and remove the
jammed original.
Open the finisher door and clear any
jammed paper (if there is). If this error
message shows on the screen again,
cycle power.
Clear the jam.
Replace a drum cartridge with a
Samsung-genuine drum cartridge.
Replace a drum cartridge with a
Samsung-genuine drum cartridge.
Replace a drum cartridge with a
Samsung-genuine drum cartridge.
Open the DADF cover and remove
jammed original.
Unplug the power cord and plug it back
in.
Service Manual
4-65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents