Setting Job Timeout; Using Energy Saving Feature - Samsung SCX-6345N/XAA Service Manual

4.4.2.4 Setting job timeout

When there is no input, the machine waits for a specific time. You can set the amount of time the machine will
wait.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. Login message appears, enter password with number keypad and press OK.
4. Press General tab.
5. Press Timers.
6. Select System Timeout.
7. Select On.
8. Select time using left/right arrows.
9. Press OK.
4.4.2.5 Setting the tray and paper
You can select the tray and paper you use for printing job.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. Login message appears, enter password with number keypad and press OK.
4. Press General tab.
5. Press down arrow to switch the screen, press Tray Management.
6. Select tray and its options such as paper size, type, and Tray Confirmation Message.
7. Press OK.

4.4.2.6 Using energy saving feature

The machine provides energy saving features.
Scan Power Save: reduces machine's power consumption when it is not in actual use.
Power Save: saves power by turning off the scan lamp. The scan lamp under the scanner glass automatically
turns off when it is not in use to reduce power consumption and extend the life of the lamp.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. Login message appears, enter password with number keypad and press OK.
4. Press General tab.
5. Press down arrow to switch the screen, press Energy Saver.
6. Select appropriate option and time.
7. Press OK.
Samsung Electronics
Alignment & Adjustments
Service Manual
4-25