13. Remove the seven screws securing the Main Drive,
as shown below.
14. First release the Harness from the Cable Clamp, and
then remove the Main Drive, as shown below.
15. Pull the Damper Units securing the both side of the
Side Duplex Cover in the direction of arrow, as
shown below.
Samsung Electronics
16. Apply light pressure to the both side of the Side
Duplex Cover and pull it in the direction of arrow, as
shown below.
17. Remove the one screw securing the Bracket and
remove it. Then release the Harness from the Cable
Clamp.
18. Remove the one screw securing the Holder Pad Unit
and remove it.
Disassembly and Reassembly
Service Manual
5-29