Table of Contents
Advertisement
5. Go to Paper pane.
6. Set paper type to correspond to the paper loaded in the tray from
which you want to print.
7. Click Print to print.
CHANGING THE FONT SETTING
Your machine has preset the font for your region or country.
If you want to change the font or set the font for special condition, such as
the DOS environment, you can change the font setting as follows:
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings.
5. Click Printer Setup.
6. Click PCL.
7. Select your preferred font in the Symbol Set list.
8. Click Apply.
Following information shows the proper font list for corresponding
languages.
•
Russian: CP866, ISO 8859/5 Latin Cyrillic
•
Hebrew: Hebrew 15Q, Hebrew-8, Hebrew-7 (Israel only)
•
Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek
•
Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864,
Farsi, ISO 8859/6 Latin Arabic
•
OCR: OCR-A, OCR-B
SETTING JOB TIMEOUT
When there is no input for a certain period of time, the machine exits the
current menu and goes in to the default settings. You can set the amount of
time the machine will wait.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Job Timeout and press OK.
5. Enter the time using up/down arrow or numeric keypad.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
AUTO CONTINUE
This is the option to set the machine to continue printing or not, in case that
the paper size you have set and the paper in the tray mismatches.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Auto Continue and press OK.
5. Press the up/down arrow until the setting option you want appears.
•
On: Automatically prints after set time passes, when the paper size
mismatches the tray paper size.
•
Off: Waits until you press Start on the control panel, when the paper
size mismatches the tray paper size.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
AUTO TRAY SWITCH
This is the option to set the machine to continue printing or not, in case that
both tray1 and tray2 are filled with same size paper, the machine
automatically prints from tray2 after tray1 get empty.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Auto Tray Switch and press OK.
5. Press the up/down arrow until the setting option you want appears.
•
On: Automatically prints after tray 1 get empty.
•
Off: Waits until you load the paper in the tray 1.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
Basic setup_ 52
Advertisement
Table of Contents
