Setting Print Job Timeout - Samsung CLX-3160FN Service Manual

Alignment and Adjustmens

6.4.8 Setting print job timeout

You can set the amount of time a single print job is active before it must print.
The machine handles incoming data as a single job if it comes in within the specified time. When an error
occurs while processing data from the computer and the data flow stops, the machine waits the specified
time and then cancels printing if data flow does not resume.
1. Press Menu until System Setup appears on the bottom line of the display and press OK.
2. Press OK when Machine Setup appears.
3. Press the Scroll buttons until Job Timeout appears and press OK.
4. Press the Scroll buttons until the time setting you want appears and press OK.
5. Press Stop/Clear to return to Standby mode.
Service Manual
6-15
Samsung Electronics