Diskette Drive Adapter Removal - IBM 3270 Maintenance Manual

Diskette Drive Adapter Removal
1. Set the Power switch on the system unit (and
expansion unit, if attached) to Off.
2. Unplug the power cords of the system unit
(and expansion unit) from the outlet and
disconnect all cables from the· rear of the
unit.
3. Remove the cover of the system unit (or
expansion unit) (5-100-2).
4. Remove the Diskette Drive Adapter mounting
screw.
5. Grasp the adapter by the top corners and lift
straight up.
6. Disconnect the signal cable from the adapter.
5-600-2 Maintenance Information