Printer-Memory Adapter
Replacement.
This procedure explains how to replace either
128KB Memory-Printer
1. Refer to Section 6 and set the four DIP
switches on the 128KB Memory-Printer
Adapter for the total amount of memory
installed.
2. If you have only the 128KB Memory-Printer
Adapter, go to step 4.
3. If you have both adapters, hold the the
expansion card so that the connector and
spacers are aligned with corresponding
connector and holes on the memory-printer
adapter.
4. Press the two cards firmly together.
October 1984
5-200-11