Drive Belt Removal
1.
Set the Power switch on the system unit (and
expansion unit, if attached) to Off.
2. Set the Power switches on all attached
devices to Off.
3.
Unplug the power cord of the system unit
(and expansion unit) from the outlet.
4. Disconnect all cables from the rear of the
system unit.
5.
Remove the cover of the system unit (5-100-2).
6. Remove the diskette drive (5-601-2) or
(5-601-6).
7.
Carefully place the diskette drive on a work
surface, with the drive belt and pulleys facing
up.
8. Lift the belt off the large pulley, then off the
small pulley.
(Bottom View)
October 1984
5-601-15