Drive C Removal - IBM 3270 Maintenance Manual

Drive C Removal
Warning: Normal shipping and handling can
result in permanent loss of all data and
formatting of the fixed disk drive. We
recommend that you copy all files onto diskettes.
Note: Before removing the fixed disk drive, load
the Diagnostic diskette and select "Prepare
System for Relocation".
1. Set the system unit (and expansion unit)
Power switch to Off, then unplug the
expansion unit power cord and remove all
cables from the rear of the unit.
2. Move the keyboard, display, and all external
options a way from the work surface.
3. Remove the cover of the system unit or
expansion unit (5-100-1).
4. Tilt the unit up and remove the mounting
plate screw for drive C.
o
o
(Bottom View)
5-1700-2 Maintenance Information
Fixed Disk/Diskette Drive
Mounting Plate
Diskette
Drive A
(no screw)
Remove this
screw