1.
Press 0, then Enter to select RUN
DIAGNOSTIC ROUTINES.
2. Depending on the configuration of your
system, questions about your attached devices
may appear on your screen. Press Y or N as
required, then press Enter.
3. Press Y or N (IS THE LIST CORRECT?), then
press Enter. (If the list is incorrect, follow
the instructions on the screen to correct the
list before answering yes.)
4. Press 0 (RUN TESTS ONE TIME), then press
Enter.
5. Press 3, then 2 (DISPLAY ADAPTER), then
press Enter.
Note: Patterns will appear on the screen for
approximately 60 seconds while the display
diagnostics run.
DID YOU GET A 32XX DIAGNOSTIC
ERROR?
NO
Go to page 3-3200-8.
YES
3-3200-2 Maintenance Information