Changing The Display; Setting Up The Printer - TESTO 350 M/XL Getting Started

5. Setting up Control Unit and analyser box measurement system 35

5.10 Changing the display

· Measurement menu is activated.
1
Open main menu.
Device
2 Select –>
- Display is shown. The parameter and the unit is shown in every field.
3 Use
4 Open menu with .
Parameter
5 Select
6 Select parameter and confirm with
7 Select unit and confirm with
- The changed parameter with unit appears in the selected field.
5.11 Setting up printer
1 Assign function button with line feed
2 Tilt the printer cover upward
3 Place paper in the back slot and push it in
4 The paper is drawn by pressing the function button
pushed in gently by hand if necessary.
5 Place paper roll in lid.
6 Close instrument lid.
7 Pull paper through the front slot.
View
.
to select field.
.
.
LF D D r
.
.
.
LF D D r
. The paper can be