Carrying out a reset of the measuring
instrument
Configuration mode is open, "RESET" is displayed.
◄
1
Press
MENU/ENTER:
o
NO: Do not carry out reset.
o
YES: Carry out reset. The instrument is reset to the factory
settings.
The instrument returns to measurement view.
Measuring
The instrument is switched on and is in the measurement view.
1
Position the probe.
2
Read the measured values on the display.
An arrow symbol at bottom left indicates the direction of flow:
: Exhaust air
: Supply air
Changing the measurement channel
display
1
To switch the display of the second parameter between volume flow
3
(m
/h, l/s, cfm) and temperature (°C):
Press ►.
Freezing a reading, displaying the
maximum/minimum value
The current reading can be frozen. The maximum and minimum values since
the last time the instrument was switched on in the standard view or during a
multi-point or continuous measurement can be displayed.
◄
1
Press
►
/
to select the required option and confirm with
several times until the desired value is displayed.
7 Using the product
15