SonicWALL TZ 210 Series Getting Started Manual page 54

TZ_210_GSG.book Page 43 Thursday, November 13, 2008 7:41 PM
Configuring a DMZ Zone
Since the public server is added to the LAN zone by default,
configure a DMZ zone by performing the following steps:
1. In the Network > Interfaces panel, click the Configure
button for the X2 interface. The Edit Interface window
displays.
Note:
If the X2 interface is not displayed in the Interfaces list,
click the Show PortShield Interfaces button to show
all interfaces.
2. Select DMZ as the Zone Type.
3. Select Static as the IP assignment.
4. Enter an IP Address for the interface. This IP address
must be in the same subnet as your Web server's local IP
address.
Tip:
Since we used 192.168.168.123 in the example on
page 42, use 192.168.168.1 as the DMZ interface IP.
The newly created DMZ interface appears in the Interfaces list.
Editing the Address Object
The address object that was automatically created must be
changed from the LAN zone to DMZ zone.
1. On the Network > Address Objects page, click the
configure button corresponds to your Web server object. In
our case, the object is called "My Web Server Private".
2. Change the Zone Assignment to DMZ and click OK.
SonicWALL TZ 210 Series Getting Started Guide Page 43