SonicWALL TZ 210 Series Getting Started Manual page 39

TZ_210_GSG.book Page 28 Thursday, November 13, 2008 7:41 PM
3. In the Add Rule page on the General tab, select Allow or
Deny or Discard from the Action list to permit or block IP
traffic.
Page 28 Creating Network Access Rules
4. Configure the other settings on the General tab as
explained below:
• Select the service or group of services affected by the
access rule from the Service drop-down list. If the
service is not listed, you must define the service in the
Add Service window. Select Create New Service or
Create New Group to display the Add Service
window or Add Service Group window.
• Select the source of the traffic affected by the access
rule from the Source drop-down list. Selecting Create
New Network displays the Add Address Object
window.
• Select the destination of the traffic affected by the
access rule from the Destination drop-down list.
Selecting Create New Network displays the Add
Address Object window.
• Select a user or user group from the Users Allowed
drop-down list.
• Select a schedule from the Schedule drop-down list.
The default schedule is Always on.
• Enter any comments to help identify the access rule in
the Comments field.