SonicWALL TZ 210 Series Getting Started Manual page 28

TZ_210_GSG.book Page 17 Thursday, November 13, 2008 7:41 PM
Enabling Anti-Spyware
To enable Anti-Spyware in SonicOS:
1. Navigate to the Security Services > Anti-Spyware page.
2. Select the Enable Anti-Spyware checkbox.
3. In the Signature Groups table, select the Prevent All and
Detect All checkboxes for each spyware danger level that
you want to prevent.
Note:
Prevent all blocks attacks of the chosen priority, Detect
All saves a log of these attacks which can be viewed in
the Log > View screen.
4. Click the Accept button to apply changes.
Anti-Spyware contains other useful features, including:
• Exclusion Lists excludes network nodes when
Anti-Spyware enforcement is not necessary.
• Log Redundancy controls log size during high-volume
intrusion attack attempts by enforcing a delay between log
entries.
• Clientless Notification displays messages to users when
content is blocked by SonicWALL Anti-Spyware.
• Outbound Inspection enables scanning and logging of
outbound spyware communication attempts.
• Disable SMTP Responses suppresses the sending of
email messages to clients when spyware is detected.
Tip:
For a complete overview of Anti-Spyware features,
refer to the SonicOS Enhanced Administrator's Guide.
SonicWALL TZ 210 Series Getting Started Guide Page 17