SonicWALL TZ 210 Series Getting Started Manual page 37

TZ_210_GSG.book Page 26 Thursday, November 13, 2008 7:41 PM
Manual PortShield Configuration
You can also manually group ports together using the graphical
PortShield Groups interface. Grouping ports allows them to
share a common network subnet as well as common zone
settings.
To manually configure a PortShield interface:
1. Navigate to the Network > PortShield Groups page.
2. Click one or more interfaces in the PortShield interface and
then click the Configure button.
3. Select Enabled from the Port Enable drop-down menu.
4. Select the port with which you wish to group this interface
from the PortShield Interfaces drop-down menu
Page 26 Configuring Interfaces
Note:
Interfaces must be configured before being grouped
with PortShield. For instructions, see the Configuring
an Interface section, on page 24.
5. Click the OK button. Your new port groupings display as
color-coded ports.