Accessing The Management Interface - SonicWALL TZ 210 Series Getting Started Manual

TZ_210_GSG.book Page 5 Thursday, November 13, 2008 7:41 PM

Accessing the Management Interface

The computer you use to manage the SonicWALL TZ 210
series appliance must be set up to connect using DHCP, or with
a static IP address in your chosen subnet. The default subnet
for LAN zone ports is 192.168.168.x.
If your SonicWALL TZ 210 series appliance required a reboot
after completing the Setup Wizard, wait until the
longer lit before continuing.
To access the SonicOS Web-based management interface:
1. Enter the default IP address of http://192.168.168.168, or
the LAN IP address you chose during the Setup Wizard, in
the Location or Address field of your Web browser.
Tip:
If you changed the LAN IP of your SonicWALL during
the Setup Wizard, you may need to restart your
computer for changes to take effect.
2. When the SonicWALL Management Login page displays,
enter your username and password (default values are
"admin" for user name and "password" for password).
If the System > Status page (shown below) displays, then you
have correctly configured the SonicWALL TZ 210 series
appliance to work with the computer on your LAN.
LED is no
SonicWALL TZ 210 Series Getting Started Guide Page 5