Care And Maintenance; Specifications - Clas Ohlson WK8237NSY-UK Instruction Manual

Overheat/boil-dry protection
The overheat/boil-dry protection will automatically turn off the kettle if it is accidentally
turned on when it is empty. The protective device will reset automatically once
the kettle has cooled.
Descaling
After some use limescale may build up in the kettle. For descaling, use a mixture
of water and white vinegar (acetic acid) or a special descaling agent that can be
purchased at most supermarkets, etc.
• Mix 100 ml of white vinegar (not regular vinegar) with 300 ml cold water or follow
the directions included with the descaling agent.
• Pour the mixture into the kettle and turn it on. Let the mixture boil twice. Thereafter,
pour the mixture away.
• In order to remove the last remnants of limescale and descaling agent, the kettle
should be filled to the MAX mark with fresh water. Turn the kettle on and let it come
to the boil.
• Pour out the water and repeat this process 3 times. The kettle is now ready to use again.
The kettle should be descaled after every 2–3 months of daily use.

Care and maintenance

• Clean the product using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• Remove the spout filter when necessary by carefully pressing it downwards to
release the lock catch and carefully removing it. Clean the filter and refit it by
setting the lower catch in place first.
• If the kettle is not to be used for an extended period, unplug the lead and coil it
into the base for storage. Clean the kettle and place it on its base in dry, dust-free
environment for storage.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.

Specifications

Supply voltage 220–240 V, 50/60 Hz
Power 1850–2200 W
Water capacity 1 l
6