Takenaka System FS5000GE Instruction Manual page 45

Feature (Item)
<AnalogControls>
GainRaw
GainAuto
AgcGainRaw
BlackLevelRaw
<UserSets>
UserSetSelector
UserSetSave
UserSetDefaultSelector
<TakexCameraControls>
FcTestImage
FcMenu
FcPageSelector
FcSaveCfg
FcSavePage
FcLoadPage
FcModeSW (EX)
FcShutterSW
[E xplanatory note]
Items indicated by bold face : The custom feature or custom value of TAKENAKA's product.
Items indicated by italic face : Accompanied by writing/rewriting to the nonvolatile ROM inside the camera.
Items indicated by (Ex) : Visibility is defined in Expert.
Read/Write : R/W (Read/Write), R (Read only). C (Command)
Content (Set value)
Sets the gain set value in MGC mode.
Sets the AGC operation
Off : AGC = OFF
Continuous : AGC = ON
Sets the gain set value in AGC mode.
Sets the black level (Image offset level)
Selects the destination to do UserSetSave.
:
Default Selects the factory default.
UserSet1: Selects the first user set.
Saves the set contents to the destination specified by UserSetSelector.
(Note) Can not be saved to Default.
Selects the destination to load at start-up.
the feature User Set to load and make active when the device is reset.
:
Default Selects the factory default.
UserSet1: Selects the first user set.
Displays the test pattern output from camera block.(BW gray scale)
Off: Display OFF
On: Display ON
ON/OFF of OSD menu display
Off: Display OFF
On: Display ON
Selects the page of FcSavePage and FcLoADPage
Saves the current configuration flag set value of the camera.
Saves the set contents of the camera.(Specified by FcPageSelector)
(Note) it boots up at next start-up in accordance with the contents of FR and CR (common
for each page) saved in the page (Page A as default)specified by hypothetical mode SW.
Loads the set contents of the program page of the camera.
(Page is specified by FcPageSelector)
Changes the set value of hypothetical mode SW
PositionA : Sets the hypothetical mode SW to A
PositionB : Sets the hypothetical mode SW to B
...
PositionF : Sets the hypothetical mode SW to F
(Note) Changed contents are saved and remains effective at next power-on.
Changes the set value of hypothetical shutter SW
Position0 : Sets the hypothetical shutter SW to 0
Position1 : Sets the hypothetical shutter SW to 1
...
Position9 : Sets the hypothetical shutter SW to 9
(Note) Changed contents are saved and remains effective at next power-on.
(0 to 255)
(0 to 255)
(0 to 255)
- 45 -
M10510B;45/58
Read/
Write
R/W
R/W
R/W
R/W
R/W
C
R/W
R/W
R/W
R/W
C
C
C
R/W
R/W