Takenaka System FS5000GE Instruction Manual page 40

(16) Command "BCMC"
Function: Command for clearing the specified bit of configuration flag register (CR) (Bit Clear Mode Configuration)
Transmission from host: STX: "BCMC": specified bit(4 characters) : ETX
Return by camera:
The specified bit of the mode flag register can be cleared (reset).
The specified bit is defined by the data assigning "1" to the corresponding bit.
(Example) Transmit as (STX) BCMC1005(ETX) to clear the specified bit12,2 and 0 in the register.
(17) Command "BCMF"
Function: Command for clearing the specified bit of mode flag register (FR) (Bit Clear Mode Flag)
Transmission from host: STX: "BCMF": specified bit(4 characters) : ETX
Return by camera:
The specified bit of the mode flag register can be cleared (reset).
"Specified bit" is defined by 2 bytes data (4 characters) in binary coded hexadecimal system assigning "1" to the specified
bit and "0" to the other bit.
(Example) Transmit as (STX) BCMF1005(ETX) to clear the specified bit12,2 and 0 in the register.
(18) Command "BSMC"
Function: Command for setting the specified bit of configuration flag register (CR) (Bit Set Mode Configuration)
Transmission from host: STX: "BSMC": specified bit(4 characters) : ETX
Return by camera:
The specified bit of the configuration register can be set.
"Specified bit" is defined by 2 bytes data (4 characters) in binary coded hexadecimal system assigning "1" to the specified
bit and "0" to the other bit.
(Example) Transmit as (STX) BSMC1005(ETX) to set the specified bit12,2 and 0 in the register.
(19) Command "BSMF"
Function: Command for setting the specified bit of mode flag register (FR) (Bit Set Mode Flag)
Transmission from host: STX: "BSMF": specified bit(4 characters) : ETX
Return by camera:
The specified bit of the mode flag register can be set.
"Specified bit" is defined by 2 bytes data (4 characters) in binary coded hexadecimal system assigning "1" to the specified
bit and "0" to the other bit.
(Example) Transmit as (STX) BSMF1005(ETX) to set the specified bit12,2 and 0 in the register.
(20) Command "SMC"
Function: Command for saving configuration flag register (CR) (Save Mode Configuration)
Transmission from host: STX: "SMC": ETX
Return by camera:
The current content of the common mode flag register can be saved in EEPROM.
(21) Command "RMP"
Function: Command for reading the current OSD menu page (Read Menu page)
Transmission from host: STX: "RMP": ETX
Return by camera:
(22) Command "WMP"
Function: Command for switching the current OSD menu page to page n (Write Menu page)
Transmission from host: STX: "WMP": n (1 character): ETX
Return by camera:
STX: ACK: ETX (transaction completion), or STX: NAK: ETX (transaction rejection)
STX: ACK: ETX (transaction completion), or STX: NAK: ETX (transaction rejection)
STX: ACK: ETX (transaction completion), or STX: NAK: ETX (transaction rejection)
STX: ACK: ETX (transaction completion), or STX: NAK: ETX (transaction rejection)
STX: ACK: ETX (transaction completion), or STX: NAK: ETX (transaction rejection)
STX: ACK: "RMP": Page number(1 character) : ETX (transaction completion),
or STX: NAK: ETX (transaction rejection)
STX: ACK: ETX (transaction completion), or STX: NAK: ETX (transaction rejection)
- 40 -
M10510B;40/58