Built-In Contextual Help; Stick/Knob/Switch Assignment Interface; Reset Function Interface; Main Menu - Fly Sky FS-i10 Instruction Manual

Digital proportional radio control system
5.3 Built-in Contextual
The help icon is both in the title and bottom bars.
Touch the left side of the bottom bar
or the right side of the title
bar top
contextual help menu.
5.4 Stick/Knob/Switch Assignment
Interface（Pic.2）
The system has both 2-way and 3-way switches,
when at bottom/middle position the switch is active.
The sticks are by default assigned to aileron,
elevator and throttle.
Knobs (VrA-VrE) can be assigned to control some
function parameters in real time.
Switches can also be assigned to logic switches to
control conditions.
Pic.1
14
Help（Pic.1）
to gain access to the
Pic.2
5.5 Reset Function
When [ICON] is touched the system will display a
prompt:
[Yes]: Select yes to return the current function or
menu to its factory default setting.
[NO]: Select no to cancel.
• Once you confirm, the system will
Note restore all function parameters
back to factory values.
5.6 Main Menu（Pic.4）
By default there are 3 pages with 27 menus, each
page displays 12 icons, swipe left, or right to change
page. The current page is represented at the bottom
with 3 dots, the largest dot is the current page.
The menu changes depending on the current model
setup and type, any function that is not needed will
be hidden and will remain inactive.
Pic.3
FS-l10
Interface（Pic.3）
Pic.4