Controls And Indicators - Teo 7810 TSG Series Installation Instructions Manual

C o n t r o l s a n d I n d
C o n t r o l s a n d I n d
1) Display – shows the multifunction key labels, call states, caller ID, dialed digits, network
call control messages, and elapsed time during calls. When not on a call, the date, time
of day, and softkey options are displayed.
The viewing angle is primarily set by selecting the high or low base mounting position
(page 11) . Display contrast can be adjusted by a menu selection.
2) Line Keys – used for Primary Line Appearances.
Line Appearance Key Indicator
Winking Green
Flashing Green
3) Multifunction Keys – used for Additional Line Appearance, Direct Station Selection/
Busy Lamp Field (DSS/BLF), Feature, or Speed Dial keys. The optional 8030X Button
Expansion Module provides 30 additional multifunction keys.
Red and green indicators on the keys show line appearance, DSS/BLF and feature
status.
13-280138 Rev. H
i c a t o r s
i c a t o r s
OFF
Steady Green
Line State
Idle (On-Hook)
In Use (Off-Hook)
On Hold
Ringing
Introduction
Page 7