Controls And Indicators - Teo 4104 Installation Instructions Manual

Teo IP Phone 4104 Installation Instructions
C o n t r o l s a n d I n d
C o n t r o l s a n d I n d
1) Display – shows the call state, caller ID, dialed digits, network call control messages,
elapsed time during calls, the date and time of day, and softkey options.
The viewing angle is primarily set by changing the base/mounting bracket angle (page
11). Display contrast can be adjusted by a menu selection.
2) Line Keys – used for Primary Line Appearances.
Line Appearance Key Indicator
Winking Green
Flashing Green
3) Multifunction Keys – used for Additional Line Appearance, Direct Station Selection/
Busy Lamp Field (DSS/BLF), Feature, or Speed Dial keys. The optional 8030X Button
Expansion Module provides 30 additional multifunction keys.
Red and green indicators on the keys show line appearance, DSS/BLF and feature
status.
Page 6
i c a t o r s
i c a t o r s
OFF
Steady Green
Line State
Idle (On-Hook)
In Use (Off-Hook)
On Hold
Ringing
13-280131 Rev. J