Installation Pin - Teo 7810 TSG Series Installation Instructions Manual

I n s t a l l a t i o n P I N
I n s t a l l a t i o n P I N
You can set a PIN to prohibit unauthorized entry into the Installation Options menu.
If a PIN is currently set, the display will prompt you to enter your PIN prior to making
changes.
From the Installation Options menu, select PIN.
→ INSTL → ► → PIN)
( SETUP
Select SET.
Enter a new 4 to 20 digit PIN with the dial pad.
If you need to make corrections, select ◄BKSP (backspace) to delete the previous digit, or
select CLEAR to remove all digits.
Press the
OK
Repeat the PIN when prompted to verify the new entry.
Press the
OK
"PIN SET" will be displayed to confirm the new PIN.
Record your PIN for future reference.
If you lose your PIN, you will no longer be able to access the Installation
Options menu – contact Teo Technical Support for assistance.
Press the
OK
to exit Setup Mode.
R e m o v i n g t h e P I N
R e m o v i n g t h e P I N
To remove the Installation Options PIN, the phone must be reset. Refer to Reset to Factory
Default Settings below.
13-280138 Rev. H

INSTALLATION PIN

SET
ENTER PIN:*********
£BKSP CLEAR
key.
VERIFY:************
£BKSP CLEAR
key.
PIN SET
key to return to the Installation Options menu or press the
Installation Options
key
SETUP
Page 51