Restarting The Phone - Teo 7810 TSG Series Installation Instructions Manual

P i n g
P i n g
Select PING to verify the path to an IP address.
Select a device to ping.
Or, select OTHER, enter an IP address or server name, and then select PING.
Character entry is explained on page 18.
The display will show the result of the ping test.
Press any key to return to the Ping menu.
When finished, press the
the key to exit Setup Mode.
SETUP
R e s t a r t i n g t h e P h
R e s t a r t i n g t h e P h
Select Restart to reset the phone. If you are on an active call you will be disconnected. The
call log will be cleared. No configuration parameters will be altered, and the error log will
not be cleared.
From the Administration Options menu, select RESTART.
→ ADMIN → ► → RESTART)
( SETUP
Select YES to restart the phone.
13-280138 Rev. H
SELECT DEVICE TO PING
PHONE GATEWY TFTP PROXY
SELECT DEVICE TO PING
SNTP DHCP REGSTR OTHER
OTHER=
DELETE CLEAR PING
PING4 SUCCESSFUL
PRESS ANY KEY TO EXIT
PING4 FAILED
PRESS ANY KEY TO EXIT
key to return to the Diagnostic Options menu or press
OK
o n e
o n e
RESTART?
YES NO
Administration Options
¤
£
Page 63