Sip Registration - Teo 7810 TSG Series Installation Instructions Manual

R E G S T R ( S I P R e g i
R E G S T R ( S I P R e g i
Select one of the displayed options. The current setting will be shown.
(Enable or Disable SIP Registration)
ENABLE
Select ENABLE or DISABLE.
When finished, press the
(Fully-Qualified Domain Name or IP Address)
ID
Select CHANGE.
Enter or edit the fully-qualified domain name or IP address with the dial pad
(maximum 128 characters). Character entry is explained on page 18.
When finished, press the
PORT
Select CHANGE.
Enter or edit the proxy port number with the dial pad (maximum 5 numeric
characters). Character entry is explained on page 18.
When finished, press the
SIP signaling will use the new port number on the next call or registration attempt.
13-280138 Rev. H
s t r a t i o n )
s t r a t i o n )

SIP REGISTRATION

ENABLE ID
SIP REG=ENABLED
ENABLE DISABLE
key to return to the SIP Registration menu.
OK
REG=192.168.72.111
REG=192.168.72.111
DELETE CLEAR 123
key to return to the SIP Registration menu.
OK
REGISTRAR PORT=5060
REGISTRAR PORT=5060
DELETE CLEAR 123
OK key to return to the SIP Phone Configuration menu.
PORT
CHANGE
CHANGE
Installation Options
Page 33