1. Manuals
  2. Brands
  3. Teo Manuals
  4. IP Phone
  5. 7810
  6. Network administration manual

Teo 7810 Network Administration Manual

Hide thumbs Also See for 7810:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Instruction and Installation Manual
Teo Technologies, Inc.
11609 49
th
Place West
Mukilteo, WA 98275-4255
(800) 524-0024 (425) 349-1000
Fax (425) 349-1010
www.teotech.com
I
P
T
e
l
e
p
h
o
n
e
I
P
T
e
l
e
p
h
o
n
e
Network Administration Guide
Software Version xx.04.18, Document #13-280132 Rev. Q
June 2014

Advertisement

Table of Contents
loading

Related Manuals for Teo 7810

Summary of Contents for Teo 7810

  • Page 1 Teo Technologies, Inc. 11609 49 Place West Mukilteo, WA 98275-4255 (800) 524-0024 (425) 349-1000 Fax (425) 349-1010 www.teotech.com Network Administration Guide Software Version xx.04.18, Document #13-280132 Rev. Q June 2014...
  • Page 2 Teo IP Telephone Network Administration Guide © 2014 Teo Technologies, Inc. All rights reserved. Page 2 13-280132 Rev. Q...

  • Page 3: Table Of Contents

    Introduction ..........................5 Document Overview ......................5 Network Setup ..........................7 DHCP Server ......................... 7 Automatic IP Configuration (DHCP) ................7 Configuring the DHCP Server ..................7 SIP Registrar Server ......................15 Syslog Server ........................15 Configuring Telephones ......................17 Telephone Setup Menus ....................
  • Page 4 Teo IP Telephone Network Administration Guide Security Guidelines ........................65 Secure/Encrypted Server Communications ............... 65 Enabling Secure Real-time Transport Protocol (SRTP) ..........65 Enabling Transport Layer Security (TLS) and Setting the Port Number ....65 Using Online Certificate Status Protocol (OSCP) to Verify Certificates ....66 Phone Certificate and Private Key ................

  • Page 5: Introduction

    This manual is intended for use by network administrators. This Network Administrator’s Guide explains network administration and network-based phone configuration for Teo 7810, 7810 TSG series, 4104, and 4101 IP telephones. Troubleshooting procedures are also included in this guide. Network Setup – setting up the various servers required for a SIP IP system.
  • Page 6 Teo IP Telephone Network Administration Guide Page 6 13-280132 Rev. Q...

  • Page 7: Dhcp Server

    NOTE: When setting up servers and telephones, server names can be entered in place of IP addresses. DHCP (Dynamic Host Configuration Protocol) assigns IP addresses to telephones, and can provide other information to the phones, such as server addresses. When using DHCP, phones do not need to be configured with static IP addresses.
  • Page 8 Teo IP Telephone Network Administration Guide When the lease expires the phone shows a diagnostic display if idle, while attempting to negotiate a new IP address lease at preset intervals. If the phone is active, the call will be unaffected and the diagnostic display will be shown when the call is cleared.
  • Page 9 Network Setup The server’s fully qualified domain name can include the path to a subdirectory of the server root, such as "http://myserver/teoupdates/7810". Alternatively, you can use the UpdateSrvr parameter in vendor-specific DHCP Option 125 to configure this parameter. In addition, Option 125 allows you to set VLAN and other parameters that may be sufficient to configure phones without an update server.
  • Page 10 Click the Add button located under the Option Name. Enter Vendor Specific Teo Option in the Name field, select "Encapsulated" as the Data Type, enter 125 as the Code, and enter Option 125 for Teo in the Description field.
  • Page 11 For example, in this case as illustrated below: ( [16*13] + 3 = 211 decimal) or D3 hex. Prepend the converted Teo PEN ID 99CC and the converted length D3 in the Hex window, resulting in the following: 13-280132 Rev.
  • Page 12 Teo IP Telephone Network Administration Guide Then, if the entry is short, manually enter the hex values in the DHCP Option 125 window (overwrite the existing 00 values): b. If you prefer, use the netsh command: C:\Users\Administrator.PROSERV>netsh netsh>dhcp netsh dhcp>server netsh dhcp server>scope 172.172.173.0 (example scope)
  • Page 13 DHCP Option 66 if it is set here. The naming scheme for custom XML configuration ConfigFile files (not used with the Teo protocol). This configures the same parameter as XML tag <config_file_name_base>. MAC – Ethernet MAC address (default) LINE –...
  • Page 14 If left blank or omitted, <SipProxyServer> will be used. This value is used inside SIP message headers, in the form <line_id>@<SipRegistrar>:<SipRegPort>, to reference the SIP server (e.g. 1000@teo:5060 or 1000@192.168.72.5:5060). Port number for the SIP Registrar. This configures the SipRegPort same parameter as XML tag <sip_reg_port>, in the...

  • Page 15: Sip Registrar Server

    Network Setup 4. Click the Add button located under the Option Name. Enter Teo VLAN Option in the Name field, select "String" as the Data Type, enter 242 as the Code, and enter Teo VLAN Activation Control in the Description field. When completed click 5.
  • Page 16 Teo IP Telephone Network Administration Guide Page 16 13-280132 Rev. Q...

  • Page 17: Configuring Telephones

    PINs, refer to the telephone's Installation Instructions. You can enter the Installation Options menu when the phone is idle. Press the SETUP key (7810 series) or the MENU key (4104, 4101). SETUP MENU INSTL ADMIN...
  • Page 18 Teo IP Telephone Network Administration Guide Page 18 13-280132 Rev. Q...

  • Page 19: Xml Configuration Files

    Configuration files can contain sections for specific telephone models. In the sample file on page 22, the first section is loaded into 7810/7810-TSG with or without an 8030X Button Expansion Module. The next section applies only to phones without an 8030X, and the last section applies only to phones with an 8030X.

  • Page 20: Xml Declaration

    The model tags enclose all settings for a telephone model or group of models. A configuration can contain multiple model tags. In the example below, the settings in the first model element apply to 7810 models, with or without an 8030X Button Expansion Module. The second model element contains settings that only apply to 7810-TSG models without an 8030X.

  • Page 21: Other Settings

    XML Configuration Files 7810 (7810) 7810 + 8030X (7810 + 8030X Button Expansion Module) 7810-TSG (7810-TSG) 7810-TSG + 8030X (7810-TSG + 8030X Button Expansion Module) 7810PoE-TSGA (7810PoE-TSGA) 7810PoE-TSGA + 8030X (7810PoE-TSGA + 8030X Button Expansion Module) 7810PoE-TSGB (7810PoE-TSGB) 7810PoE-TSGB + 8030X (7810PoE-TSGB + 8030X Button Expansion Module)

  • Page 22: Sample Xml Configuration File

    Teo IP Telephone Network Administration Guide Page 22 13-280132 Rev. Q...
  • Page 23 XML Configuration Files 13-280132 Rev. Q Page 23...
  • Page 24 Teo IP Telephone Network Administration Guide Page 24 13-280132 Rev. Q...

  • Page 25: Xml Tag Tables

    All valid XML tags are listed in the tables below, grouped as follows: • Update Settings • Network Settings • Security Settings • SIP Settings • General Phone Settings • Dial Plan Settings • MLPP Settings • Conference, Call Forward, and Voicemail Keys •...

  • Page 26: Update Settings

    These settings control automatic updating of telephone software and configuration settings from a TFTP, HTTP, HTTPS, or Teo UC server. Update Settings XML Tag Data / Description <update> Update server settings. update_server : IP address or server name of the <update_server source=”src”>...
  • Page 27 Recommended Program window duration is one hour per 60 phones on a single Program server. 1 – 24, default value = 3 config_auto: Enable/disable automatic configuration updates (not used with TEO protocol). OFF (default) config_time: Configuration update start hour. Configuration automatic update process begins at a pseudo-random interval after this time each day.
  • Page 28 Teo IP Telephone Network Administration Guide Update Settings XML Tag Data / Description <config_file_name_base> The naming scheme for custom XML configuration name base files, either Ethernet MAC address or phone line ID; </config_file_name_base> not used with Teo protocol. Enter this tag in the "TCS7000A.xml" global configuration file or in DHCP Option 125 ConfigFile parameter.

  • Page 29: Network Settings

    Security Guidelines Network Settings XML Tag Data / Description Allows the DHCPv4 Server to supply network settings. <ip_dhcp4_enable> mode ON (default) </ip_dhcp4_enable> IPv4_DISABLE – turns off DHCPv4 and sets the IPv4 address to 0.0.0.0. This setting allows the phone to operate in IPv6-only mode.
  • Page 30 Teo IP Telephone Network Administration Guide Network Settings XML Tag Data / Description <ip6_phone_global> One of five IPv6 Global Addresses for the phone. index="index"> index is the global address is being set: G1, G2, G3, address G4 or G5. </ip6_phone_global>...
  • Page 31 Security Guidelines Network Settings XML Tag Data / Description IP Address of the Primary NTP Time Server. May be <time_server source="src"> provided by DHCP or statically assigned. address or name </time_server> src is source of the IP address: DHCP4 – use address provided by DHCPv4 Option 4, if available (default) STATIC –...
  • Page 32 Teo IP Telephone Network Administration Guide Network Settings XML Tag Data / Description Enables automatic daylight savings time adjustment <dst enabled=”ON/OFF”> at the specified start and end dates each year. <start_date> date ON/OFF indicates enabled or disabled. </start_date> ON (default) <end_date>...
  • Page 33 Security Guidelines Network Settings XML Tag Data / Description VLAN / Ethernet Layer 2 802.1Q support. <vlan> <enable> enable ON/OFF OFF (default) </enable> If <ip_dhcp4_enable> is ON, this parameter will be <id> configured by DHCPv4 Option 125 or Option 242 L2Q VLAN ID parameter, if available.

  • Page 34: Security Settings

    Teo IP Telephone Network Administration Guide Network Settings XML Tag Data / Description The NAT keepalive rate in seconds. <nat_keepalive_timer> domain name A value of 0 (zero) disables NAT keepalive. </nat_keepalive_timer> 0 – 255 seconds, default value = 0 (disabled)
  • Page 35 Security Guidelines Security Settings XML Tag Data / Description The file that contains explicitly-trusted responder <ocsp_va_cert> certificates. filename.pem </ocsp_va_cert> This option must be provided if the certificates are self-signed. filename includes the full path specification, and can be up to 250 characters. The file that contains the certificate used to sign the <ocsp_signer_cert>...
  • Page 36 Teo IP Telephone Network Administration Guide Security Settings XML Tag Data / Description <cal_mode> The phone’s Confidential-Access-Level Mode. mode NONE (default) </cal_mode> FIXED VARIABLE <cal_access_level> The phone's fixed mode Confidential-Access-Level. level 0 – 99 </cal_access_level> <cal_matrix> An array of 100 integers comprising the phone’s integer list Confidential-Access-Level Matrix.

  • Page 37: Sip Settings

    GENERIC (default) </server_type> AVAYA <sip_user_agent> The string used in the SIP User-Agent header. header string If this string contains Teo, the phone will append </sip_user_agent> _<model>/<software_version>_<mac_address> Maximum length is 128 ASCII characters. default value = Teo <sip_url_type> Defines the type of URL that is transmitted in URL type outbound INVITE messages.
  • Page 38 Teo IP Telephone Network Administration Guide SIP Settings XML Tag Data / Description <sip_attmpt_b4_backup> The number of unsuccessful transmissions before the unsuccessful transmissions phone switches to the Backup Proxy Server in the </sip_attmpt_b4_backup> form xx with leading zeros suppressed. 2 to 10, default value = 8 <sip_retry_reg_timer>...
  • Page 39 Security Guidelines SIP Settings XML Tag Data / Description <sip_privacy_values> Defines a string up to 32 characters to be used for the string SIP Privacy Header in accordance with RFC 3323. </sip_privacy_values> <sip_compact_hdrs> Enables the generation of SIP compact headers. ON/OFF </sip_compact_hdrs>...
  • Page 40 Teo IP Telephone Network Administration Guide SIP Settings XML Tag Data / Description Allows audio silence suppression. The purpose is to <silence_suppress> detect silent periods in the voice signal and ON/OFF temporarily discontinue transmission of RTP packets </silence_suppress> during silence.
  • Page 41 If left blank or omitted, <sip_proxy_addr> will be used. This value is used inside SIP message headers, in the form <line_id>@<sip_registrar>:<sip_reg_port>, to reference the SIP server (e.g. 1000@192.168.72.5:5060 or 1000@teo:5060). If <sip_proxy_addr source= DHCP4> SIP Registrar will be provided by DHCP Option 125, SipRegistrar parameter, if available.
  • Page 42 Teo IP Telephone Network Administration Guide SIP Settings XML Tag Data / Description Determines if registration with the SIP Registrar is <sip_registration> enabled. ON/OFF </sip_registration> If ON is selected, the phone will determine if an IP address is available for the SIP Registrar; if so, it will attempt to register with it.
  • Page 43 Security Guidelines SIP Settings XML Tag Data / Description Port number for the SIP Registrar when the Backup <sip_backup_reg_port> Proxy Server is used. port number </sip_backup_reg_port> 1025 – 65534, default value = 5060 This value is used inside SIP message headers, in the form <line_id>@ <sip_backup_reg_id>:<sip_backup_reg_port>, to reference the SIP server.
  • Page 44 Teo IP Telephone Network Administration Guide SIP Settings XML Tag Data / Description Up to 10 SIP servers can be configured. <sip_server_list> index: 1 – 10, identifies the server, and determines <ss index="index"> server priority; 1 is the highest priority.

  • Page 45: General Phone Settings

    Security Guidelines Settings in this section include user preference settings, feature activators, multifunction key assignments, call control, call directory, and dialing plans. General Phone Settings XML Tag Data / Description <display_contrast> This sets the phone display contrast. contrast level 1–8, default value = 4 </display_contrast>...
  • Page 46 Teo IP Telephone Network Administration Guide General Phone Settings XML Tag Data / Description When off-hook, this is the amount of time the phone <phone_dial_timeout> waits after a digit is pressed before sending the dialed seconds digits to the SIP Call Server for call processing, if the </phone_dial_timeout>...
  • Page 47 Security Guidelines General Phone Settings XML Tag Data / Description Determines the action of the phone when going off <ring_pref> hook with the handset, speaker key, or headset key. ringing preference </ring_pref> RING – the oldest ringing call is automatically selected;...

  • Page 48: Dial Plan Settings

    Teo IP Telephone Network Administration Guide A Dial Plan allows the administrator to configure the phone so that specific dial patterns direct the phone to: General Functionality • Automatically initiate a call upon recognition of a specific dial pattern •...
  • Page 49 Security Guidelines (left & right brace/curly brace/curly bracket, ASCII 123 & 125) encloses prefix and suffix operations (circumflex accent/caret/hat, ASCII 94) wildcard, matches any dialed digit (vertical bar/vertical line, ASCII 124) separates components in a prefix or suffix, indicates a substitution; characters to the left of the | are replaced by characters to the right (grave accent/acute accent/backquote, ASCII 96) in a dial string, instructs the phone to produce a secondary dial tone...
  • Page 50 Teo IP Telephone Network Administration Guide 1425 Since there are no digits in front of the bar in the prefix operation, the digits after the bar are added to the dialed digits, which match the dial string, when the phone sends them out.

  • Page 51: Mlpp Settings

    Security Guidelines <dial_plan>{|}911,{|}|{9[0-4]|}9[0-4]{|`R0}</dial_plan> The components in the above dial plan can be broken down as follows: ,{|} If 911 is dialed, it will be sent without modification (will not be treated as a precedence call). The string is not sent until the user presses send, OK, or the dial timeout occurs.
  • Page 52 Teo IP Telephone Network Administration Guide MLPP Settings XML Tag Data / Description (rph_namespace continued) Example Resource Priority SIP header: Resource Priority: dsn-000000.8 \_ priority (r-priority) <priority index="index" \_ (precedence domain) disp="name> \_ netname (network domain) priority The phones have three predefined namespaces: </priority>...

  • Page 53: Feature Activator Functions

    Security Guidelines MLPP Settings XML Tag Data / Description <max_rph_r_priority> Sets the maximum priority level the phone is allowed index to call. Calls dialed with a higher priority than the </max_rph_r_priority > maximum will be assigned the maximum allowed priority value. 0 –...
  • Page 54 Teo IP Telephone Network Administration Guide Feature Activator Functions XML Tag Data / Description <fa index=”x”> </fa> x corresponds to the dial pad (All additional tags for a feature activator are key used to select the Feature enclosed within this tag.)
  • Page 55 Security Guidelines Some features require different types of functionality such as additional dialed digits, establishment of another call, and control of the feature key LED. Additional characters can be added to the code string to enable this functionality. Following are some typical feature “star codes”...

  • Page 56: Conference, Call Forward, And Voicemail Keys

    Teo IP Telephone Network Administration Guide Conference, Call Forward, and Voicemail Keys XML Tag Data / Description Defines the conference operation assigned to the <conference_key> conference type CONF key on the phone. </conference_key> TCS LOCAL – conferences are implemented locally in the phone.
  • Page 57 (7810 only). keynum is the multifunction menu key that is being defined, 1 – 10. vcode: The string that is dialed for the selected 7810 voice mail menu key, 128 characters max. vlabel: The 7810 on-screen menu key label, 18 characters max.

  • Page 58: Multifunction Keys

    Teo IP Telephone Network Administration Guide This section defines multifunction key assignments. All tags in the following tables must be enclosed within the <multi_function_key_list> </multi_function_key_list> tag. All tags for a single key must be enclosed within the <key num=”x”> </key> tag.
  • Page 59 SIP Authentication ID, 128 characters max. </sip_auth_id> <sip_password> password SIP Authentication Password, 128 characters max. </sip_password> On-screen key label, 18 characters max. <label> (7810 series only). label text </label> Default is the line ID unless specified. Bridged Line Appearance: <bla_shared> bridged status (shared BLA) </bla_shared>...
  • Page 60 Teo IP Telephone Network Administration Guide Line Keys XML Tag Data / Description <tone_type> Determines the ringing tone type for a line. tone type 1 – 6, default value = 5 </tone_type> <control_type> Determines how a line will ring. ringing type ALWAYS (always ring) (default) </control_type>...
  • Page 61 SIP Authentication ID, 128 characters max. </sip_auth_id> <sip_password> password SIP Authentication Password, 128 characters max. </sip_password> <label> On-screen key label, 18 characters max. label text (7810 series only). </label> (Preferred) Codec Type: <codec1> codec type G711 (default) </codec1> G729A G722 (optional) Codec Type: <codec2>...
  • Page 62 Teo IP Telephone Network Administration Guide BLF_PRES, BLF_DLOG, and DSS Keys XML Tag Data / Description (optional) Codec Type: <codec3> codec type G711 </codec3> G729A G722 (default) NONE <ptime> Packetization time. milliseconds 10, 20, 30, 40 milliseconds, default value = 20 </ptime>...
  • Page 63 ACD Group ID, typically a 4-digit extension, 128 ACD Group ID characters max. </group_id> <label_1> On-screen key label for Login/Logout Key, 18 label text characters max. (7810 series only). </label_1> <label_2> On-screen key label for Activate/Deactivate Key, 18 label text characters max. (7810 series only). </label_2>...

  • Page 64: Call Directory Entries

    Teo IP Telephone Network Administration Guide 7810 series: Up to 100 Call Directory entries are allowed. Ten entries are displayed on each telephone screen page. 4101: Up to 12 Call Directory entries are allowed. Only one entry at a time is displayed on the telephone screen.

  • Page 65: Security Guidelines

    Security Guidelines To ensure secure communications and configuration, the phone should have TLS enabled and required certificates installed. The phone should use HTTPS protocol to update its configuration and have TLS and SRTP enabled for voice communications. In addition, for configuration security, the phone should use the <MAC> XML option for configuring phones.
  • Page 66 Teo IP Telephone Network Administration Guide OSCP is an optional method of further checking the validity of the certificate sent by the server to the phone. It checks online with other servers for certificate revocation status. XML Tag Data / Description Enables the Online Certificate Service Protocol <ocsp_enable>...
  • Page 67 Security Guidelines XML Tag Data / Description This .pem file contains the certificate and private key <cert_private_phone> for the phone. The server must have the certificate filename and public key in order to validate the phone. </cert_private_phone> filename includes the full path specification, and can be up to 250 characters.

  • Page 68: Sip Server Access

    The default port value is dependent on the update server protocol (TEO, HTTPS, HTTP, or TFTP) and can be provisioned via DHCP Option 66 or 125. The default port value can be changed to a different value through this mechanism.
  • Page 69 Security Guidelines For example: <key num=”1”>LINE <line_id> 1234 </line_id> <sip_name> ALEXANDER </sip_name> <sip_auth_id> 2235551234 </sip_auth_id> <sip_password> PasswordNotSecure </sip_password> <label> John Doe </label> </key> 13-280132 Rev. Q Page 69...
  • Page 70 Teo IP Telephone Network Administration Guide Page 70 13-280132 Rev. Q...

  • Page 71: Teo Uc System

    The file TCS7000B.xml names the compressed application and boot program files to be downloaded to the phones. The file is supplied with the updates. Use the built-in update process through the Admin Portal of the Teo UC Server. Phone software update files can be downloaded directly from the Teo UC Server.
  • Page 72 Teo IP Telephone Network Administration Guide Page 72 13-280132 Rev. Q...
  • Page 73 Packet statistics are tabulated on a per call, per call appearance basis, and may be viewed while a call is in progress or after a call is completed. Counts are updated once a second while a call is in progress. Statistics are saved for the most recent call on each call appearance.
  • Page 74 Teo IP Telephone Network Administration Guide expected packets). These are normal packets that have average transmission delay, but with minimal jitter delay or packets that arrive early. Delayed packets may or may not be played, depending on jitter buffer settings.
  • Page 75 The complete BNF syntax that defines the structure for the dial plan is as follows: <dial_plan> ::= <component>* <component> ::= <prefix-operation> <dial-pattern> <suffix-operation> <prefix-operation> ::= “{“ <subst-pattern-element>* “|” <dial-character>* “}” <subst-pattern-element> ::= <dial-character> | <wildcard> | <bracket-expression> <dial-pattern> ::= <dial-pattern-element>+ [<dial-pattern-terminator>] <dial-pattern-element>...

  • Page 76: Meta Operations

    Teo IP Telephone Network Administration Guide the current dialed string entry matches the <dial-pattern> preceding the marker. A <block- at the end of the directs the phone to immediately cancel access-marker> <dial-pattern> the outbound call with reorder tone, if the current dialed string entry matches the <dial-...
  • Page 77 Teo IP telephones have built-in diagnostic and testing capabilities to quickly isolate problems affecting their operation. & & Whenever power is applied or a connection is made to the LAN or WAN, the phone initiates a startup routine, with progress shown in the display. When the phone and network are fully initialized, the idle display, indicating date and time, will be shown.
  • Page 78 Teo IP Telephone Network Administration Guide Problem Observed Remedial Action The primary line has not registered with the SIP server. Verify all entries (LINE ID, AUTH ID, AUTH REGISTERING LINES Password, all IP addresses and subnet mask) and re- enter as required.
  • Page 79 Appendix C – Troubleshooting After the phone is fully initialized (idle display showing), the following diagnostic information may be reviewed, using the ADMIN→DIAG Menu. Diagnostic Mode Information Provided LINK option selected: The LINK option provides information about the network and SIP server status as follows: 1) Status about the network will be displayed: PHY:100MBPS IP:AUTO OK...
  • Page 80 Teo IP Telephone Network Administration Guide Diagnostic Mode Information Provided Total of delayed (in excess of 20ms) packets Total of delayed (in excess of 30ms) packets Total of delayed (in excess of 40ms) packets Total of delayed (in excess of 50ms) packets...
  • Page 81 Appendix C – Troubleshooting Diagnostic Mode Information Provided PING option selected: The PING option provides the means for measuring single packet network delays. The following IP addresses may be “pinged”: PHONE GATEWAY UPDATE SERVER SIP PROXY SERVER NTP SERVER DHCP SERVER SIP REGISTRAR SERVER OTHER* *A valid address must also be entered.
  • Page 82 Place West Fax: (425) 349-1010 Mukilteo, WA 98275-4255 USA E-mail: helpdesk@teotech.com Web : www.teotech.com Teo is committed to meeting the product needs of our customers. Please write or call us with any suggestions for improvement. Page 82 13-280132 Rev. Q...
  • Page 83 dscp_mlpp_priority ......... 53 dscp_mlpp_routine ......... 53 dscp_signal ..........33 activation ..........54 dscp_voice ..........33 ai ...............40 dst ............32 alert_auto_answer ........59 alert_info ..........40 arp_star_enable ........34 auto_answer ..........40 emergency_number ....... 48 enable ............33 end_date ..........32 bla_shared ..........59 blf_console_base ........47 fa ..............
  • Page 84 Teo IP Telephone Network Administration Guide phone_dial_timeout ........ 46 phone_domain ........30 phone_max_reorder ........ 46 jitter_buffer_adaptive ......60, 62 phone_max_ringing ........ 46 jitter_delay ......... 60, 62 jitter_delay_max ........ 60, 62 phone_port ..........37 phone_rtp_port ........39 jitter_delay_min ......... 60, 62 phone_subnet ..........
  • Page 85 XML Tag Index sip_call_deflect_id ........56 time_adjust..........32 sip_compact_hdrs ........39 time_offset ..........31 sip_early_media ........39 time_server ..........31 sip_invite_timeout ........46 time_server_key ........31 sip_name ..........59, 61 time_server2 ........... 31 sip_password ........59, 61 tls_require_cert ........35 sip_privacy_values ........39 tone_type ..........60 sip_proxy_addr ........41 sip_proxy_port .........41 sip_refresh_use_update ......38...
  • Page 86 Teo IP Telephone Network Administration Guide Page 86 13-280132 Rev. Q...

This manual is also suitable for:

41017810 tsg series4104

Table of Contents