Table of Contents
Advertisement
6-11. SYSTEM SETUP
█ Front Button Lock
Switches ON/OFF Rock function for Front Key button .
When Button Lock is On, excluding MENU button, all the other buttons will not
work. Standby Power button will not work as well.
█ Front Button LED
Shows button selection status & LED On/Off .When switching LED Button Off,
Standby button also becomes OFF
█ Test Pattern : without additional Input Source, it provides internal Test
pattern of 1920X1080 30p on the screen. (Off, Blue, Green, Red, 0~100% White)
█ Clock Sync Source : In Split Mode 4, Clock signal can be in sync with either
Internal or LTC. When LTC setup, if there is no external LTC input, then, it
automatically converted into Internal mode.
█ Clock Adjust : When Clock Sync Source and Internal mode, in Split Mode 4,
clock OSD time can be set.
█ Setup Load
This is a function that changes each setup status of the product
-Factory Default mode: changes factory default mode
But, Remote ID Number value will not be initialized.
-User 1, 2, 3 mode : changes User1,2,3 setup
█ Setup Save
-Used to set current Menu setup status.
-There are 3 modes such as USER 1, 2, 3 mode.
-saved value can be recalled anytime via Setup Load Function
█ Function 1,2
Used to select the functions to be
assigned to individual buttons to F1,F2.
(For detailed information, please refer to
3-4 table.)
█ Back Light
Used to adjust brightness of LCD Panel
-- 38 --
Advertisement
Table of Contents
