▪ Remote ID Number : Set the number when controlling IR remote controller (Option)
▪ Serial Remote : Select whether use external Serial Port control or not.
Not operated Key and IR remote controller when Serial Remote is ON.
!
To terminate Serial Remote status (Update, Remote ON), press Menu
button for 3 sec.
!
To terminate Update Firmware status, press Menu button for about 3 sec.
▪ Setup Load : This menu is the function to make wholly change for function value which has
already been set.
Factory : To return to the factory default.
User 1,2,3 : Menu setting is transferred to the Menu of 1,2,3 to be saved by user.
▪ Setup Save : Save current menu setting. The types of save are USER 1,2,3.
USER 1,2,3 can be used by Setup Load.
▪ Firmware Version : Program version.
▪ Operating Time : Product operating time.
6-6. GPI CONTROL
▪ GPI Control :
Select external control terminal ON/OFF.
It is not possible to control through
Remote terminal from outside or external
area when it is OFF.
▪ GPI Port 1,2,3,4,5,6,7
Select each terminal of external Remote
Control Terminal (RJ-45).
Double function for each port is prohibited.
!
6-7. SYSTEM CONFIGURATION
▪ Function 1,2 : Select the functions to be
assigned to individual buttons to F1 and F2.
▪ Back Light : Adjust lightness of LCD
Panel.
▪ Update Firmware : Use for update
program.
-- 21 --
GPI Port 7 is fixed with Standby.