Source Id Setup - bon BQM-170LS Operating Instructions Manual

6-8. SOURCE ID SETUP

!
When you change Source ID, you can conveniently use Volume Knob
█ You can set ID for each input
signal.
Once you set the ID, it displays on
the UMD display window. UMD
supports alphabet small letter,
capital letter, some of special
characters. Upto 10 digits supported.
█ How to change Source ID :
Using MENU/Enter/Up/Down key,
you can change Source ID
- MENU : Source ID modification
end & Save
- Enter : selects character and move
next digit
- Up : changes upper
- Down : changes lower order
-- 34 --