Table of Contents
Advertisement
6-4. Display SETUP
█ Pixel to Pixel :Used to show the picture as original input source size in SD-SDI
or Analog mode or used to show picture as P2P mode in 2K format signal input.
Position can be located as following 5 areas :
Off, Center, Right Bottom, Left Bottom, Right Top, Left Top
█ Aspect :
When following signal input such as Analog (Composite, Component, S-Video),
HDMI (SD level), SD-SDI (NTSC / PAL), 2Ksf, 2Kp Format, it changes picture
16:9 or Native Ratio (Original Source).
If HD-SDI such as 1080i, 1080p, 720p and 16 : 9 Source HDMI, even though
user change Aspect Menu item, the picture does not change. Also with DVI, VGA
channel, this function does not support.
This menu sets picture size or output
█ PC Scan : sets output either Fill mode or Aspect
mode in VGA channel.
-Aspect : displays original source rate
-Fill : displays source filled to screen size
-- 26 --
Advertisement
Table of Contents
