Audio Setup - bon BQM-170LS Operating Instructions Manual

6-9. AUDIO SETUP

•Audio Output Channel has from CH1 ~ CH16
- Left Channel : CH 1, CH 3, ~ CH 15
- Right Channel : CH 2, CH 4, ~ CH 16
- GROUP1 : CH 1 ~ CH 4
- GROUP2 : CH 5 ~ CH 8
- GROUP3 : CH 9 ~ CH 12
- GROUP4 : CH 13 ~ CH 16
█ Audio Level Meter
-displays the level of inputted Audio Signal as Level Bar type on the screen.
-Level Bar Display :
- SDI (Embedded Audio) -> maximum 16 CH,
- HDMI Channel or Line In Audio -> Left (CH1), Right(CH2) , total 2 CH
█ Level Meter Direction
-sets Audio Level Display Direction either Horizontal or Vertical.
█ Speaker Source
-selects Speaker Out among Auto / SDI 1 / SDI 2 / SDI 3 / SDI 4 / Line In
█ Speaker Volume
-sets Speaker Output Level.
-Speaker, Ear-Phone Output is controlled by Speaker Volume
-Line Out is not affected by Speaker Volume.
- When you select HDMI Video Input, if you set Speaker Source into Auto, it
!
outputs HDMI Audio into Speaker.
- Audio Level Meter is automatically set as same as Speaker Output.
█ Play Channel [ L ]
-designates extracted sound signal from
Speaker Source into Left Output
Channel.
█ Play Channel [ R ]
-designates extracted sound signal from
Speaker Source into Right Output
-- 35 --