3. Control and Functions
3.1. Front Panel
BQM-170LS,240LS(Front Push Button)
3.1. Front Panel
①STANDBY
-Power ON/OFF Button. When you power OFF, it operates after being pushed
about 1 second
②SDI, SDI2, SDI3, SDI4 INPUT SELET
-Used to select HD/SD-SDI CH1, CH2, CH3, CH4
③YPbPr, RGB(Component) INPUT SELECT
-Used to select Components Signal
-By pressing this button, it converts Input modes between YPbPr and RGB Mode
④DVI/VGA INPUT SELECT
-Used to select DVI/VGA Signal
-By pressing this button, it converts Input mode between DVI and VGA Mode
⑤HDMI INPUT SELECT
- Used to select HDMI Signal
-- 8 --