Table of Contents
Advertisement
6-7. GPI PORT Setup
▪ Remot e I D Number : Used to set own number for monitor in case I R remote Control (Option)
▪ Ser ial Remot e : Select whether use external Serial Port control or not.
I f Ser ial Remot e is on, I R remot e contr oller and Key do not w or k
To terminate Serial Remote Status (Update, Remote On), press Menu button for 3
!
seconds.
6-8. SYSTEM
▪ Set up Load : Used to change Setup.
- Fact or y Mode: Used to return to factory default.
- User 1,2,3 mode : Menu Setting is transferred to the Menu of 1,2,3 to be saved by user.
▪ Set up Save : Used to save current Menu setting. User 1,2,3 can be used by Setup Load.
▪ Fir mw ar e Ver sion : Displays F/W Version and H/W Version.
▪ Oper at ing Time : Displays operating time of the product.
Not e) W hile Back Light is adj ust ed, LCD panel r equir es enough t ime t o be
!
st able adj ust ing Phase (br ight ness). I t r equires mor e t han 30 minut es.
▪ GPI Cont r ol :
Used to select external control terminal ON/OFF. I t is
not possible to control through Remote terminal from
outside or external area when it is OFF
▪ GPI Por t 1,2,3,4,5,6,7
Used to select each terminal of external Remote
Control Terminal (RJ- 45).
However, GPI Port7 is fixed as Key Standby. For detailed
information, please refer to category 8- 1,2,3
▪ Funct ion 1,2,3,4 : Used to select the functions to be
assigned to individual buttons to F1, F2, F3, F4
(For detailed information, please refer to category 3-4)
▪ Fr ont But t on Lock : Sets ON/OFF lock function of
front key buttons.
▪ Setup Load : used to change product setup status.
- Factory Mode: used to return to the factory default.
- User 1,2,3 Mode : Menu Setting is transferred to the
Menu of 1,2,3 to be saved by user
-- 21 --
Menu Setup
Advertisement
Table of Contents
