Table of Contents
Advertisement
8. Program Update Port(RJ-11)
Update Port(RJ-11) can be used in a situation as below.
1) To modify Firmware program
2) To control Color Temperature, Gamma Setting for LCD
3) To control Multi Monitors using PC Exclusive use program "Wall System Control" on PC
!
1 2 3 4 5 6
Update (RJ-11)
1 2 3 4 5 6
8-1. Multi Monitor Control (through Update Port)
Multi Monitor Control can be operated by exclusive use Adaptor(RS-232C <-> Serial Conversion)
Converting device and by PC where exclusive use program (Wall System Controller) is installed.(Option)
PC (Control S/W)
BWC-100
Adaptor(RS-232C <-> Serial Data)Converting Device
Please consult with technician for Program Update or for Serial Port
use. Incorrect use of this port may cause damage or malfunction.
1 PIN
2 PIN
3 PIN
.
A
-- 42 --
Update Terminal Assignment
NC
4 PIN
RX+
5 PIN
RX-
6 PIN
GND
TX+
TX-
Advertisement
Table of Contents
