Settings - DEVI 532 Installation Manual

3

Settings

How to change the minimum and maximum floor tem-
peratures
1. Remove the adjust-
ment button.
2. Move the pins to the
desired positions.
3. Put the adjustment
button back in place.
Note Please be aware of the following:
▪ The floor temperature is measured where the floor
sensor is placed.
▪ The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
▪ Floor manufactures often specify the max temperature
on the top surface of the floor (usually 27-28˚C).
▪ By default, the maximum floor temperature is set to
35°C.
▪ Always use a floor sensor or a room + floor sensor
combination to control floor heating. Without a floor
sensor, the temperature control may be less accurate
and you risk overheating the floor.
10
DEVIreg™ 532
15
40
30 50
20
Installation Guide
20
25
30
35