Replacing A Front Turn Signal Light Bulb - Honda legend Owner's Manual

09/01/28 18:38:04 32SMG631_492
5. Insert the new bulb into the
headlight assembly. Make sure it
is on all the way.
6. Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock in place. Make
sure it is right side up; it is marked
''TOP.''
7. Turn on the lights to make sure
the new bulb is working.
8. On the left side
Put the battery back to its original
position, reinstall the nut on the
stay and tighten it securely.
Replacing a Front Turn Signal
Light Bulb
HOLDING CLIP
1. To change the left side bulb, start
the engine, turn the steering
wheel all the way to the right, and
turn off the engine. To change the
right side bulb, turn the steering
wheel to the left.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
3. Pull the inner fender cover away
from the fender and bumper.
CONTINUED
Maintenance
Lights
487