Honda legend Owner's Manual page 57

09/01/28 17:38:52 32SMG631_057
Installing a Child Restraint System
ATTACHING CLIP
TETHER ANCHOR FITTING
Lift the head restraint (see page
167 ), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not twisted.
Attach the clip to the tether anchor
fitting, then tighten the strap as
instructed by the child restraint
system maker.
52
Driver and Passenger Safety
7. Push and pull the child restraint
system forward and from side-to-
side to verify that it is secure.
The design and suitability of the
child restraint systems must be
carefully checked with the child
restraint system manufacturer
concerned and the seller of those
systems. If you are not sure, consult
your dealer before purchasing this
type of child restraint system.