Odometer; Trip Meter; Outside Temperature Indicator - Honda legend Owner's Manual

09/01/28 17:45:03 32SMG631_100

Odometer

The odometer shows the total
number of kilometers or miles your
vehicle has been driven.

Trip Meter

This meter shows the number of
kilometers or miles driven since you
last reset it.
There are two trip meters: trip A and
trip B. To switch the display between
them, press the SEL/RESET button
repeatedly. When you turn the
ignition switch to the ON (II)
position, your last selection is
displayed.
Each trip meter works independently,
so you can keep track of two
different distances.
To reset a trip meter, display it, and
then press and hold the SEL/RESET
button until the number resets to
''0.0.''
'' '' or '' '' will be
displayed when the average fuel
mileage is selected in the upper
segment, depending on which trip
meter (trip A or trip B) is displayed
in the lower segment.

Outside Temperature Indicator

This indicator displays the outside
temperature in Celsius.
The temperature sensor is in the
front bumper. Therefore, the
temperature reading can be affected
by heat reflection from the road
surface, engine heat, and the
exhaust from surrounding traffic.
This can cause an incorrect
temperature reading when your
speed is under 30 km/h (19 mph).
The sensor delays the display update
until it reaches the correct outside
temperature. This may take several
minutes.
Multi-Information Display
If the outside temperature is
incorrectly displayed, you can adjust
it by up to 3°C warmer or cooler
±
(see page 125 ).
The temperature must be
NOTE:
stabilized before doing this
procedure.
In certain weather conditions,
temperature readings near freezing
(0°C) could mean that ice is forming
on the road surface. You will also see
a caution symbol on the multi-
information display (see page
Instruments and Controls
104 ).
95