Honda legend Owner's Manual page 493

09/01/28 18:38:13 32SMG631_493
Lights
SOCKET
BULB
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn anticlockwise.
488
Maintenance
On some types
Remove the air intake
Left side only:
duct to access the light assembly.
5. Remove the bulb from the socket
by pushing it in and turning the
bulb anticlockwise until it unlocks.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Turn on the lights to make sure
the new bulb is working.
8. Put the inner fender in place.
Install the two holding clips. Lock
each clip in place by pushing on
the centre.