Honda legend Owner's Manual page 271

09/01/28 18:07:52 32SMG631_271
Audio System (on vehicles with navigation system)
SCAN The scan function samples
−
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
With the interface dial, push the
selector down, then push it to the
right to select the scan mode.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.
266
Features
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again or push
the selector on the interface dial to
the right again.
Preset Each preset button/icon
−
can store one frequency on AM
(MW) and LW, and two frequencies
on FM. To view the preset
frequencies, push the AUDIO button.
1. Select the desired band, AM
(MW), LW or FM. FM1 and FM2
let you store two frequencies with
each the preset button.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
To store the frequency on a preset
icon, push the AUDIO button to view
the audio control display, then turn
the interface dial to select a desired
preset icon. The selected preset icon
will be highlighted. Press and hold
the ENT on the dial for more than 2
seconds to enter the setting.
4. Repeat steps 1 through 3 to store a
total of 6 stations on AM (MW)
and LW, and 12 stations on FM.