Honda legend Owner's Manual page 315

09/01/28 18:14:00 32SMG631_315
Audio System (on vehicles with navigation system)
To Play a Tape
(Optional for some types)
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Make sure the open side of the tape
is facing right, then insert the tape
most of the way into the slot. The
system will pull the tape in the rest
of the way, and begin to play it.
The tape direction indicator comes
on to show you which side of the
tape is playing. The
△
side you inserted upward is now
playing. If you want to play the other
side, press the preset 5 (
button. When the player reaches the
end of the tape, it will automatically
reverse direction and play the other
side.
310
Features
You cannot select the controls on the
audio display of the navigation
system. The audio setting will be
displayed only in the side display.
The text data cannot be displayed in
the side display, so you can see the
disc and track/file numbers only.
＊
Dolby noise reduction turns on
when you insert a tape. The
indicator will come on in the
display. If the tape was not recorded
indicates the in Dolby, turn it off by pressing the
NR button. Dolby remains off until
you press the NR button again.
)
＊ Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. ''DOLBY'' and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
To Stop Playing a Tape
To remove the tape, press the eject
button on the tape player. If you
want to turn the player off, press the
power/volume knob or turn off the
ignition switch. The tape will remain
in the drive. When you turn the
system back on, the tape player will
be in pause mode. Press the preset 5
( ) button to resume play.
To switch to the radio or disc player
while a tape is playing, press the
AM/FM or CD/AUX button. To
change back to the tape player, press
the CD/AUX button again.
You can remove the tape with the
ignition switch in any position, even
if the audio system is off.