Opening And Closing The Bonnet - Honda legend Owner's Manual

09/01/28 18:22:40 32SMG631_378

Opening and Closing the Bonnet

BONNET RELEASE HANDLE
1. Park the vehicle, and set the
parking brake. Pull the bonnet
release handle under the lower
corner of the dashboard. The
bonnet will pop up slightly.
LATCH
2. Put your fingers between the front
edge of the bonnet and the front
grille. The bonnet latch handle is
above the ''H'' logo. Push this
handle up to release the bonnet.
Lift the bonnet.
If the bonnet latch handle moves
stiffly, or if you can open the
bonnet without lifting the handle,
the mechanism should be cleaned
and lubricated.
Service Station Procedures
GRIP CLIP
SUPPORT ROD
3. Pull the support rod out of its clip
by holding the grip, and insert the
end into the designated hole in the
bonnet.
CONTINUED
Before Driving
373