Information - Honda legend Owner's Manual

Table of Contents

Advertisement

09/01/28 18:53:17 32SMG631_601
Catalytic Converters (Diesel models)
To regenerate the DPF, when traffic
allows, maintain a vehicle speed of at
least 60 km/h (37 mph) and continue
to drive until the symbol/message
goes out (it may take about 15
minutes, depending on driving
conditions). This will increase the
exhaust temperature and help to
burn and remove the PM from the
DPF.
If you ignore this symbol/message
and continue driving, the system
warning switches to the symbol/
message of DPF (check system). If
this happens, take your vehicle to a
Honda dealer as soon as possible to
have the DPF system checked.
596
Technical Information
DPF (Check System)
If you see this symbol or this symbol
with a ''CHECK SYSTEM'' message
on the multi-information display
while the engine is running, it means
the diesel particulate filter (DPF) is
clogged with accumulated
particulate matter (PM) and it
should be checked, then repaired or
replaced. Take your vehicle to a
Honda dealer as soon as possible.
While in this condition, the engine
power gets reduced.
If you ignore this symbol/message
and continue driving, the DPF and
your vehicle's emission control
systems will be seriously damaged.
The catalytic converter with DPF
system must operate at a high
temperature for the chemical
reactions to take place. It can set on
fire any combustible materials that
come near it. Park your vehicle away
from high grass, dry leaves, or other
flammables.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents