Honda legend Owner's Manual page 539

09/01/28 18:44:22 32SMG631_539
Changing a Flat Tyre
WHEEL NUT
WHEEL COVER
On some models
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
534
Taking Care of the Unexpected
BRAKE HUB
Before mounting the spare tyre,
16.
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
Put on the spare tyre. Put the
17.
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
18. Lower the vehicle to the ground,
and remove the jack.